MIL-H-43540C
15 September 1988
SUPERSEDING
MIL-H-43540B
26 November 1976
MILITARY SPECIFICATION
HEATER, IMMERSION, M67, LIQUID FUEL FIRED, FOR Corrugated CANS
This specification is approved for use by all Departments and Agencies of
the Department of Defense.
1.
SCOPE
1.1 Scope. This document covers a liquid fuel burning immersion-type
heater designed primarily to heat water in a 32-gallon corrugated can.
APPLICABLE DOCUMENTS
2.
Government documents.
2.1
2.1.1 Specifications, standards, and handbooks. The following
*
specifications, standards! and handbooks form a part of this specification to
the extent specified herein. Unless otherwise specified, the issues of these
documents shall be those listed in the issue of the Department of Defense
Index of Specifications and Standards (DODISS) and supplement thereto, cited
in the solicitation.
SPECIFICATIONS
FEDERAL
- Dry Cleaning Solvent
P-D-680
- Plates and Foils, Photographic (Photosensitive
GG-P-455
Anodized Aluminum)
Beneficial comments (recommendations, additions, deletions) and any
pertinent data which may be of use in improving this document
U.S. Army Natick Research, Development,
should be addressed to:
and Engineering Center, Na tick, MA 01760-5014 by using the self-
addressed Standardization Document Improvement Proposal (DD Form
1426) appearing at the end of this document or by letter.
J
Fsc 4540
AMSC N/A
Approved for public release; distribution is unlimited.
DISTRIBUTION STATEMENT A.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business